Skip to main content

Carel Fabritius' 'A View in Delft': Some Observations on its Treatment and Display

Larry Keith
Technical Bulletin Volume 15, 1994

Abstract

The fine canvas of A View in Delft, glued to a walnut panel with some misalignment and visible lumps of glue, was freed mechanically after the accumulated varnish had been removed. The canvas had been well protected by the panel, and was not impregnated with glue. The use of a low-pressure table, to give good humidity control to correct deformations, and finally to line the work onto a linen canvas with Beva 371, is described.

The perspective of the image suggests that it was designed to be seen as a 'peepshow'.  Two ideas on appropriate viewing systems are presented. Traces of a copper-protein complex on the reverse suggest that it was once glued to a copper panel, which could then have been shaped for perspective viewing. But few details could be deduced with certainty and the work is now displayed flat, as it was before.

Keywords 

Carel Fabritius, linen, lining (process), painting (technique)

Download article

Carel Fabritius' 'A View in Delft': Some Observations on its Treatment and Display, Larry Keith (PDF 9.03MB)

To cite this article we suggest using

Keith, L. 'Carel Fabritius' "A View in Delft": Some Observations on its Treatment and Display'. National Gallery Technical Bulletin Vol 15, pp 54–63.
http://www.nationalgallery.org.uk/technical-bulletin/keith1994b

Problems opening files? Get Adobe Reader [External link]